Our Customer feedback on Ebay.
What is Wecprobe ?
Wecprobe is a multipurpose automotive electrical diagnostic tool. Great for having in your tool box when going out 4 wheel driving, on your boat or when you're broken down. Wecprobe also gives you more information with fuel injection testing. Wecprobe makes electrical fault-finding easy, it's patented technology is unbeatable. Wecprobe has a voltage range of 3 to 44 volts which gives it a very large range of uses - boats,cars,motor cycles,trucks,buses.
- LED Circuit tester
- Polarity checking
- Continuity testing
- Simultaneous
Testing of two Circuits
- Battery Tester
Superior Accuracy
- Alternator Tester
Superior Accuracy
- EFI injector pulse diagnostic tool. (It's a Noid Light alternative, there's no need to unplug anything)
- Reverse polarity Protection
- Automotive computer safe
The battery and alternator tester is safe and easy to operate and has multiple functions: It has 3 LEDs for battery condition (12.6V 100% , 12.0V 50% and 11.5V Low,) and 3 LEDs for Alternator condition (15.5V Alternator Over charge ,14.4V Alternator charge normal, 13.2V Alternator charge too low) , telling you the status of your alternator and battery, and if they are working correctly.
Continuity testing has been made easy with both visual and audio alert for the noisiest of environments
The led circuit tester is great for checking for short circuits, locating open circuits and checking for polarity. It is great for the new generation of vehicles with an operating range of 3 to 44 volts DC
As an injector pulse tester (noidlight alternative) Wecprobe will tell you if your injectors are getting the pulse from the car's computer. It is very different from other products on the market as it shows you both the constant positive and the pulsing negative at the same time (no need to unplug anything and no kit needed).
Injector Pulse Tester.
As an injector pulse tester (noidlight alternative) Wecprobe is superior to other products on the market as the Wecprobe shows both the constant positive and the pulsing negative at the same time (no need to unplug anything).
Wecprobe is ideal for sequential fuel injection, with its unique abilities and being safe to use even when the engine is running.
In the video to the right there is a constant red light (showing the constant positive) and a flashing green light (showing the pulsing negative from the vehicle computer - ecu/ecm)
If the constant positive were to be absent, there would still be a pulsing green light.
This would indicate that there is a break in the vehicle's wiring harness.
Alternator and Battery Tester.
Wecprobe is unique in the way it displays the voltage during alternator and battery testing. If, only one light is on, this means that the voltage is as displayed.
If there are two lights on this means the voltage is in between the two lights.
Instruction Manual
To download wecprobe instruction manual click here